Battery Tray

Removal

1. Remove battery from vehicle as outlined.

2. Remove retaining bolts, screws and washers from battery tray.

3. Remove battery tray from vehicle.

Installation

1. Position battery tray to inside fender in engine compartment.

2. Install retaining bolts and washers. Tighten each to 9-14 Nm (7-10 lb-ft).

3. Install battery in engine compartment as outlined.

4. Tighten hold-down bracket bolt to 7-10 Nm (6-7 lb-ft).
   
   
   
   
   

   Item	Part Number	Description
   1A	N803471-S55	Screw and Washer Assy
   2	10747	Spacer
   3	8K007	Radiator Support Upper Bracket
   4B	606688-S55	Screw and Washer Assy
   5	—	Lower Radiator Deflector
   6	8B370	Radiator Support Lower Bracket
   7	10723	Battery Tray
   8	N606676-S56	Screw and Washer Assy (2 Req'd)
   A		Tighten to 9-14 Nm (7-10 Lb-Ft)
   B		Tighten to 7-10 Nm (6-7 Lb-Ft)