Horn Button Switches

Removal

1. Disconnect battery ground cable.

2. Disconnect backup power supply.

3. Remove air bag module.
   
   
   
   

4. Remove wire retaining "organizer".
   
   
   
   

5. With a screwdriver, carefully pry horn button switch from steering wheel spoke.
   
   
   
   

6. Disconnect electrical connectors and remove horn button switch and wires.

Installation

1. Insert horn button switch wires through opening in steering wheel spoke.

2. Press horn button switch into steering wheel spoke.
   
   
   
   

3. Connect electrical connectors and install wire retaining "organizer".

4. Position air bag module on steering wheel and install four nut and washer assemblies. Tighten to 4-5.6 Nm (35-53 lb-in).
   
   
   
   

5. Connect backup power supply.

6. Connect battery ground cable.