Section 13-05: Tachometer, Oil Pressure, Coolant Temperature Gauges/Warning Indicators
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Temperature Gauge

 

Removal

  1. Remove instrument cluster. Refer to Section 13-01.
  1. Remove five screws retaining lens and mask assembly to backing plate and remove.
  1. Pull out main dial assembly from backing plate clips.
 

Installation

  1. Align gauge terminals to clips in backplate.
  1. Install main dial assembly into backing plate aligning assembly over proper guides.
  1. Position lens and mask assembly on backing plate and install five retaining screws.
  1. Install cluster.