Section 13-03: Fuel Gauge
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

 WARNING: FUEL SUPPLY LINES WILL REMAIN PRESSURIZED FOR LONG PERIODS OF TIME AFTER ENGINE SHUTDOWN.

This pressure must be relieved before servicing the fuel system. A valve is provided on the fuel rail assembly for this purpose. Attach EFI and CFI Fuel Pressure Gauge T80L-9974-B to fuel diagnostic valve on fuel rail assembly. Pressure in fuel system may now be released.

Fuel Anti-Slosh Module

 

Removal and Installation

  1. Remove instrument cluster. Refer to Section 13-01.
  1. Grasp circuit board on outside far edges of circuit board. Avoid touching circuit components.
  1. Push connector tab in and slide module out.
  1. To install, position module in guides, line up terminals over center of flex circuit connections, and push module until it clicks in place.
  1. Install instrument cluster. Refer to Section 13-01.