WARNING: FUEL SUPPLY LINES WILL REMAIN PRESSURIZED FOR LONG PERIODS OF TIME AFTER ENGINE SHUTDOWN.

This pressure must be relieved before servicing the fuel system. A valve is provided on the fuel rail assembly for this purpose. Attach EFI and CFI Fuel Pressure Gauge T80L-9974-B to fuel diagnostic valve on fuel rail assembly. Pressure in fuel system may now be released.

Fuel Gauge

Removal and Installation

1. Disconnect battery ground cable.

    CAUTION: The gauges are calibrated at the factory. Excessive rough handling could disturb the calibration. Do not remove pointers.

2. Remove the instrument cluster. Refer to Section 13-01.

3. From the front side of the cluster, remove the retaining screws and separate the cluster mask and lens assembly from the backplate. Note that these screws also retain the cluster lens to mask.

4. Remove fuel oil pressure gauge assembly.

5. To install reverse Removal procedures.