Section 12-03C: Compressor and Clutch—6P148
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Clutch Pulley Bearing

Tools Required:

 

Removal

  1. Remove the clutch hub and pulley from the compressor as outlined.
  1. Remove the bearing retainer ring from the pulley hub.
  1. Position the largest opening of Clutch Pulley Support T81P-19623-J (gold colored) over the hub of the pulley to support the pulley. Then, drive the bearing from the pulley with Pulley and Bearing Tool T80L-19703-J.


Clutch Pulley Bearing—Removal




 

Installation

  1. Place the smallest opening of Clutch Pulley Support T81P-19623-J over the dust shield on the clutch pulley friction face. Place the pulley and tool on the bench with the pulley on top of the tool.


Clutch Pulley Bearing—Installation




  1. Position the new bearing to the pulley bearing bore. Install the bearing in the bore until seated with Pulley Bearing Replacer T80L-19703-C.
  1. Install the bearing retainer in the pulley hub.
  1. Install the pulley assembly and clutch hub.