Windshield Wiper Switching

The wiper switch is located in the knob at the end of the turn signal lever. To operate the wiper, the key lock cylinder must be in the RUN position. In addition to "O" there are two fixed speed wiper positions (LO, (low), HI, (high) and an interval position. The positions are selected by rotating the knob actuator relative to the turn signal lever. If interval is selected, the time between wiper cycles will decrease as the knob is rotated away from OFF position and the time interval will increase as the knob is rotated toward OFF position. The time interval between wipes will vary depending on the knob's position from OFF position.