Section 11-04: Steering Column
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Ignition Lock Actuator and Steering Wheel Lock Pawl

 

Removal

  1. Remove lock cylinder housing from steering column.
  1. Remove the ignition switch, lock cylinder assembly and ignition lock drive gear.
  1. Slide the actuator assembly out the rear of the track in the lock cylinder housing.
  1. Remove the lock pawl and spring.
 

Installation

  1. Install the lock pawl and spring on the actuator assembly.
  1. Install the actuator assembly into the track on the lock cylinder housing, and install the lock drive gear and lock cylinder assembly.
  1. Install the ignition switch.
  1. Install the lock cylinder housing onto the steering column.