Section 03-01B: Engine, 5.0L HO and 5.0L Cobra
1993 Mustang Workshop Manual
DISASSEMBLY AND ASSEMBLY

 CAUTION: Do not oil threads that require oil resistant or water resistant sealer.

When installing nuts or bolts, oil the threads with light weight engine oil.

Refer to Section 03-00 for Cleaning and Inspection procedures.

Cylinder Block Assembly

 

Disassembly

  1. Mount the engine in a work stand and remove all parts not furnished with the new cylinder block assembly, following the procedures in Removal and Installation.
  1. Remove the four cylinder head locating dowels and the block drain plugs.
  1. Remove the used cylinder block assembly from the work stand.
 

Assembly

  1. Clean the gasket and seal surfaces of all serviceable parts and assemblies.
  1. Position the new cylinder block assembly in a work stand and install the cylinder head locating dowels and block drain plugs.
  1. Transfer all serviceable parts removed from the used cylinder block assembly, following the procedures in Removal and Installation.
  1. Check all assembly clearances and correct as necessary.