CAUTION: Do not oil threads that require oil resistant or water resistant sealer.

When installing nuts or bolts, oil the threads with light-weight engine oil.

Clutch Pilot Bearing

Tools Required:

• Puller Attachment T58L-101-B
• Impact Slide Hammer T59L-100-B
• Pilot Bearing Replacer T71P-7137-C
• Clutch Aligner T71P-7137-H

This engine is equipped with a sealed roller bearing clutch pilot.

Inspection procedures are outlined in Section 03-00, Flywheel Cleaning and Inspection.

Removal

1. Remove the transmission, clutch pressure plate and disc. Refer to Section 08-00.

2. Using Impact Slide Hammer T59L-100-B and Puller Attachment T58L-101-B, remove the pilot bearing.
   
   
   
   

Installation

1. Using Pilot Bearing Replacer T71P-7137-C and Clutch Aligner T71P-7137-H, install the pilot service bearing. Install with seal towards transmission.

2. Install the clutch pressure plate, disc and the transmission. Refer to Section 08-00.