Door Glass

The glass is installed into the glass run within the door frame. Adjustments are minimal.

Stabilizer

The stabilizer at the rear of the door is used to support the glass at the belt. With glass in the full-up position, the stabilizer is set firmly against the glass and tightened.

Fore/Aft

The glass can be moved fore-and-aft within the glass run by loosening the run and bracket assembly upper and lower retaining nut and washer and setting the glass to the desired position.

In/Out

Loosen the one screw on the lower guide of the bracket assembly. Set the glass to the desired position within the door frame glass run.