Daytime Running Lamps

Canadian Vehicles Only

The Daytime Running Lamp (DRL) system is designed to turn the high-beam headlamps of the vehicle ON, with a reduced light output, and without illuminating the high-beam indicator in the instrument panel when the following conditions are met:

• The ignition switch is in the RUN position.
• The parking brake is fully released.
• The headlamp system is in the OFF position.

The DRL system incorporates a module and bracket assembly located under the LH fender apron, directly below the battery. The wiring is connected to the 14401 wiring assembly, and is routed through a hole on the apron vertical face in front of the washer reservoir. The DRL output cannot be measured using most multi-meters, nor can the DRL module be adjusted.