Section 13-05: Tachometer, Oil Pressure, Coolant Temperature Gauges/Warning Indicators
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Engine/Oil Pressure Gauge Replacement

 

Standard Cluster

Removal

  1. Disconnect battery ground cable.
  1. Remove instrument cluster. Refer to Section 13-01.
  1. Remove screws retaining the lens and mask assembly to the cluster backplate. Remove mask and lens assembly.
  1. Remove two gauge retaining nuts. Remove gauge.
 

Installation

  1. Align replacement gauge to cluster backplate. Install two retaining nuts.
  1. Position lens and mask assembly to the cluster backplate. Install retaining screws.
  1. Install instrument cluster. Refer to Section 13-01.
  1. Connect battery ground cable. Check gauge operation.