Section 12-02: Heating and Defrosting
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Blower Switch

 

Removal

  1. Remove control assembly from instrument panel as outlined.
  1. Remove switch knob.
  1. Disconnect wire connector from switch.
  1. From underside, remove switch retaining screw and detach switch from control assembly.
 

Installation

  1. Position switch on control assembly frame. Ensure retaining tabs on switch are engaged in slots in control assembly frame. Install retaining screw.
  1. Connect wire connector to switch.
  1. Install switch knob.
  1. Install control assembly in instrument panel.
  1. Check system for proper operation.