Section 07-05: Transmission, Automatic—External Controls
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Floor Shifter Knob and Indicator Bezel

 

Removal and Installation

  1. Remove shift knob by depressing detent button and holding while pulling up firmly on shift knob. Use caution so as not to lose button and spring.
  1. Remove console top panel. Refer to Section 01-12.
  1. Remove indicator bezel retaining screws. Lift bezel and disconnect indicator lamp. Lift bezel off over shift lever.
  1. To install, reverse Removal procedure. Fully seat the shift knob by gently installing with a rubber mallet.
  1. Check the shifter for proper operation, ensuring the shifter locks in PARK and OVERDRIVE positions.