Place shift lever in OVERDRIVE. Raise vehicle. Refer to Section 00-02.
Remove shift cable retaining bolts from shifter mounted bracket. Disconnect
cable from shift lever ball stud.
Remove shift cable retaining bolts from transmission mounted bracket.
Remove shift cable retaining nut from transmission manual lever and remove
cable.
Installation
Install shift cable to shifter mounted bracket. Tighten screws to 3.4-4.8 Nm
(30-42 lb-in). Connect shift cable to shift lever.
Install shift cable mounted bracket to transmission. Tighten nuts to
25.5-34.5 Nm (19-25 lb-ft).
Place the transmission manual lever in OVERDRIVE as outlined in
Adjustments. Apply a 1.4 kg (3 lb) rearward force to the shifter lever, which
should be in OVERDRIVE.
Connect shift cable to transmission lever. Tighten retaining nut to 17-23 Nm
(13-17 lb-ft).