Wheel Alignment Checks, Front

Do not attempt to check and adjust front-wheel alignment without first making a preliminary inspection of the front end parts.

Check all the factors of front-wheel alignment, except the turning angle before making any adjustments. Check the turning angle only after camber, and toe have been adjusted to specification. Check the front-wheel alignment under the following curb load conditions:

1. Spare tire, wheel, jack and jack handle in position.

2. Front seats in rearmost position.

3. All other loading removed.

4. All tires inflated to specified pressure (cold).

5. All excessive mud, dirt and road deposit accumulation removed from chassis and underbody.

   Refer to Specifications for front-wheel alignment specifications.

Equipment Installation

Equipment used for front-wheel alignment inspection must be accurate. All wheel alignment readings must be performed on an alignment rack level to within 1.59mm (1/16 inch) side-to-side and front-to-rear. The instrumentation used must have a means of compensating for wheel runout.

Install the wheel alignment equipment on the vehicle and follow the installation and inspection instructions provided by the manufacturer.