Section 03-06: Starting System | 1993 Mustang Workshop Manual |
| Starter Motor | Max. Load | No Load | Starter Brushes | ||||
|---|---|---|---|---|---|---|---|
| Motor Diameter | Current Draw Under Normal Load | Normal Engine Cranking Speed | Min. Stall Torque @ 5 Volts | Mfg. Length | Spring Tension | ||
| 101.6mm
(4 Inches) |
130-220 Amps | 140-220 RPM | 14.7 Nm (11.0 Lb-Ft) | 800 Amps | 70 ± 10 Amps | 16.8mm (0.66 Inch) | 18 N (64 oz) |
Maximum commutator runout is 0.12mm (0.005 inch). Maximum starting circuit voltage drop (battery positive terminal to starter terminal) at normal engine temperature is 0.5 volt.
| Description | Nm | Lb-In |
|---|---|---|
| Solenoid Bolt | 5-9.5 | 44-89 |
| M Terminal Nut | 9-13 | 80-115 |
| B Terminal Nut | 9-13 | 80-115 |
| Through-Bolt | 5-9.5 | 44-89 |
| Mounting Bolt | 21-27 | 15-20 (Lb-Ft) |
| Brush Plate Screw | 2.3-3.4 | 20-30 |