Drive Belts, Accessory

Conditions requiring belt replacement are excessive wear, rib chunk-out, severe glazing, frayed cords, etc. Replace any belt exhibiting one of these conditions.

NOTE: Minor cracks in the V-grooved portion of the belt are considered normal and acceptable. If the belt has chunks missing from the ribs it should be replaced.

NOTE: When installing belts on pulley, ensure that all V-grooves make proper contact with pulleys.

Removal and Installation

1. Lift or rotate automatic tensioner.

2. Remove old belt(s).

3. Install new belt over pulleys. Ensure that all V-grooves make proper contact with the pulley as shown.