Install Rotunda Dial Indicator with Bracketry 014-00282 or equivalent so
indicator points rest on face of the flywheel.
Hold flywheel and crankshaft forward or backward as far as possible to
prevent crankshaft end play from being indicated as flywheel runout.
Set indicator dial on zero mark. Turn flywheel one complete revolution
while observing total indicator reading runout (TIR). If TIR exceeds
specification, flywheel and ring gear assembly must be replaced.
If clutch face runout exceeds specification, remove flywheel and check for
burrs between flywheel and face of crankshaft mounting flange. If no burrs
exist, check runout of crankshaft mounting flange. Replace flywheel or machine
crankshaft flywheel mounting face sufficiently to true-up the surface.
