Section 01-03: Doors, Deck Lid and Liftgate
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Door Hinge—On Door

 

Removal

  1. Open the door and support it in a full-open position.
  1. Determine which hinge is damaged.
  1. Break damaged hinge in half and remove pieces.
  1. Remove three retaining bolts that mount other (good) hinge assembly to body-side and remove door.
  1. Place the door on a clean work surface.
  1. Drill small holes around outboard perimeter of the hinge base. This will allow for a locating position to install replacement hinge on the door.
 

Installation

  1. Position the replacement hinge on the door inside the outline of drilled holes and weld the hinge in place.
  1. Install door on the vehicle reversing the removal procedure.
  1. Check door alignment.