Section 01-02: Body Panels, Front End
1993 Mustang Workshop Manual
REMOVAL AND INSTALLATION

Hood Hinge

 

Removal

  1. Open the hood and cover the fenders and cowl top panel.
  1. Prop the hood in the open position and remove two hinge-to-hood retaining screws. Refer to illustration following Hood Alignment Adjustment procedure.
  1. Remove the hinge-to-cowl retaining screws and remove the hinge.
 

Installation

  1. Position the hinge to cowl and install retaining screws snug.
  1. Position the hinge to the hood and install the two retaining screws.
  1. Adjust the hood.