Section 01-00: Body—Service
1993 Mustang Workshop Manual
CLEANING AND INSPECTION

Body Maintenance

Regular body maintenance preserves the vehicle's appearance during the life of the vehicle. The following steps are suggested as a guide for regular body maintenance:

  1. Vacuum interior thoroughly and wash vehicle.
  1. Check all openings for water leaks and seal where necessary.
  1. Cement all useable, loose weatherstrips, using Weatherstrip Adhesive E8AZ-19552-A (ESB-M2G14-A) or equivalent.
  1. Replace all door and luggage compartment deck lid weatherstrips which are damaged or worn.
  1. Apply Silicone Lubricant C0AZ-19553-AA (ESR-M13P4-A)or equivalent, to the weatherstripping.
  1. Replace all cracked, fogged or chipped glass.
  1. Align hood, doors and deck lid if necessary.
  1. Inspect windshield wiper blades and replace if necessary.
  1. Tighten scuff plate and garnish moulding screws. Refer to Section 01-05.
  1. Clean seats, door trim panels and headlining.
  1. Apply touch-up paint to chipped or scratched areas.
  1. Drain holes (located on the underside of each rocker panel, quarter panel and door) should be cleared periodically.